PMUP (T) V2 Practical Multipurpose Utility Pump w/Power Supply – Neptune Systems

Description

The PMUP is a multi-purpose pump that can be used for many different tasks on your aquarium. This listing includes a Power Supply.rrAutomatic Top-Off (ATO)rCarbon reactorsrGFO reactorsrBiopellet reactorsrMany other salt or freshwater usesrrNEW IN VERSION 2:rrAutomatic shut off when dryrOver-temperature protectionrStands upright on new removable screenrEasier to clean and maintainrrrrrThe PMUP is a 24VDC submersible pump that was designed to directly connect to the DC24 accessory ports on either the 1Link module OR the same ports on the new Energy Bar 832. If you own our WAV powerheads or our new Apex, then you have a place to plug it in! These ports are switchable and can power the pump on and off just like any other outlet on an Energy Bar.rThe PMUP is a multi-purpose pump that can be used for many different tasks on your aquarium like:rrrrAuto-Top-Off (ATO)rATO will likely be the most popular use for this pump. And unlike many wimpy pumps out there, the PMUPhas enough pressure to push water up 14 feet vertically, it can even move the water up from one floor below.rThis means you could put your RO water storage in your basement or downstairs in a utility room and it could still pump it up to the tank.rIt also has a vertically oriented design with a bottom intake and top output that is perfect for use in jugs or other RO containers. Just drop it in!rrrrRun your reactors safely and with less energyrThe PMUP is not just for ATO. It is also a great pump to use for running your various reactors bio-pellets, carbon, GFO, or even the two-stage combo unit from Spectrapure.rThe PMUP uses less than 20W of power so it is a very efficient way to run reactors and adds very little heat to your aquarium.rWere certain there will be many other uses found for the PMUP weve not even considered yet.rrrrRemovable Screen makes for easy cleaning and maintenancerMany inexpensive ATO pumps are not designed to be maintained. Its almost as if they were meant to be disposable. But the PMUP has an easy to remove screen that keeps out foreign objects and also makes it easy to clean and maintain the pump.rrrrEasy to connect with standard tubing and fittingsrThe PMUP Has a smooth, 3/8 (9.5mm) output that will easily connect to silicon tubing or standard push-fit connectors like the one shown in this image.rrrrrrSpecifications:rrDimensions4.58 x 2.24rOutput100gph @ 0rMax Head14rPower17WrrrrrrrrrrRequires:rrApex (any model)r1Link module or Energy Bar 832 with available DC24 accessory portrrrrrrrrrrrrrrrrrrrr”,”subjectOf”:[{“@type”:”CreativeWork”,”video”: {“@id”: “VideoObject_HUJLnQlcX3Q”}}] }